ZoticHeadSh0t 0 Posted May 1, 2017 Share Posted May 1, 2017 16 hours ago, XyFreak said: Can you show me how your turbines are built? 28K RF/t while at....what? 900RPM looks interesting. >_> It also looks like the coils are engaged while in KICKOFF-mode which should NOT happen. There is also a possibility that the controller core loop errors out. Can you do a quick "brgcctrl service turbine runOnce" and see if that errors? My turbines are all 16*7*7 with ludicrite. I tried running the command and nothing happened so i gues it didn't error ? (i can't code :P) Image of the turbines: Edit: they run on 1781 rpm when they are on 28k rf/t Quote Link to post Share on other sites
XyFreak 36 Posted May 1, 2017 Author Share Posted May 1, 2017 That's... an amazing build right there. If the command doesn't output anything, that's good I guess you've tried restarting the program? Same effect? Quote Link to post Share on other sites
ZoticHeadSh0t 0 Posted May 1, 2017 Share Posted May 1, 2017 Well thanks Ah okay, i guessed right! xD Yeah i already tried restarting the program and letting the reaktor stabilize before i turn on the turbines. Quote Link to post Share on other sites
XyFreak 36 Posted May 1, 2017 Author Share Posted May 1, 2017 Can you try to turn off/on each turbine with the gui? Quote Link to post Share on other sites
ZoticHeadSh0t 0 Posted May 1, 2017 Share Posted May 1, 2017 Sure, i just don't know how Quote Link to post Share on other sites
XyFreak 36 Posted May 1, 2017 Author Share Posted May 1, 2017 You can right click on the bars of the turbines (or reactors) and a detailed view of the turbine (or reactor) will pop up. There's an "on/off" button at the bottom. Quote Link to post Share on other sites
ZoticHeadSh0t 0 Posted May 2, 2017 Share Posted May 2, 2017 I Turned it on and off again yesterday and been standing chunk loading it for over 12 hours now. It seems like i got it out of the 'kickoff' state. But it doesn't seem to stabilize, it just keeps going up and down. Quote Link to post Share on other sites
XyFreak 36 Posted May 2, 2017 Author Share Posted May 2, 2017 If your energy buffer is full, this is fine. If all your turbines are drained, this is not (obviously) Quote Link to post Share on other sites
simcye 0 Posted May 9, 2017 Share Posted May 9, 2017 when I try to set the steam target I get this error https://imgur.com/a/lNwVn Quote Link to post Share on other sites
XyFreak 36 Posted May 9, 2017 Author Share Posted May 9, 2017 The image has been deleted, but I think I know what you mean. It's going to be fixed. Quote Link to post Share on other sites
LightningBlaze 0 Posted May 9, 2017 Share Posted May 9, 2017 My active reactor and 2 turbine setup keeps failing to generate the power I need with this program It seems the 2 turbines get stuck at SLOW SPINUP The speed(Target) for both of them is 499(750), each generating 4.82KRF/t, when my demand is about 15KRF/t I have several tanks holding an excess steam of about 1,000 buckets each, so I am not running out of steam, and I am using ender fluid conduits from enderIO for quick fluid transfer Edit: I should probably mention the fact that I am using 20 input/output ports on each to make sure to well overcome the ender fluid conduit limit Quote Link to post Share on other sites
simcye 0 Posted May 10, 2017 Share Posted May 10, 2017 It seems to work fine, then it decides to turn the reactors down, then turn them back up, which causes the turbines to go all over the place I need the Turbines running at top speed, I don't really need the control aspect, all I want is the display Quote Link to post Share on other sites
XyFreak 36 Posted May 10, 2017 Author Share Posted May 10, 2017 18 hours ago, LightningBlaze said: My active reactor and 2 turbine setup keeps failing to generate the power I need with this program It seems the 2 turbines get stuck at SLOW SPINUP The speed(Target) for both of them is 499(750), each generating 4.82KRF/t, when my demand is about 15KRF/t I have several tanks holding an excess steam of about 1,000 buckets each, so I am not running out of steam, and I am using ender fluid conduits from enderIO for quick fluid transfer Edit: I should probably mention the fact that I am using 20 input/output ports on each to make sure to well overcome the ender fluid conduit limit Can you please check whether the turbines get enough steam regardless? (The turbines steam input tank should not be empty). Just to make sure. SLOW SPINUP means each turbine gets 2000mB/t with inductors engaged. 56 minutes ago, simcye said: It seems to work fine, then it decides to turn the reactors down, then turn them back up, which causes the turbines to go all over the place I need the Turbines running at top speed, I don't really need the control aspect, all I want is the display This program does not support display-only-mode. It propably never will, sorry. The controller requires you to put all reactors on the same "steam network" so your setup can't work. If the turbines internal capacitor is not empty, the turbines should be at full speed at all times. If they're not, your reactors not being on the same network will propably cause this issue. Quote Link to post Share on other sites
XyFreak 36 Posted May 10, 2017 Author Share Posted May 10, 2017 Also: NEWS! As you propably noticed, I got really lazy "lately". I'm going to kinda force myself to finally (FINALLY!!!) get the new version done this weekend. It's about time! Quote Link to post Share on other sites
LightningBlaze 0 Posted May 10, 2017 Share Posted May 10, 2017 5 hours ago, XyFreak said: Can you please check whether the turbines get enough steam regardless? (The turbines steam input tank should not be empty). Just to make sure. SLOW SPINUP means each turbine gets 2000mB/t with inductors engaged. I looked to see, the steam buffer tank is full, i just tried breaking the reactor, rebooting the server, and starting it up and placing the block back, and it suddenly started working for no reason... so no clue why, but it worked Quote Link to post Share on other sites
Gavote 1 Posted May 10, 2017 Share Posted May 10, 2017 @simcye The only way I can see to get your system to run smoothly is to do a separate open computer for each turbine/reactor set or like @XyFreak implied take all of your steam and unify it. I'd suggest three OC units personally. Quote Link to post Share on other sites
Nerdanel 0 Posted May 12, 2017 Share Posted May 12, 2017 Oke so i'm completely new to open computers but I started using this program and it worked fine. however I now have a second setup on my world and for some reason the program doesn't set a target rpm speed any more in the program. I have no clue what i'm missing and I wiped the harddrive several times and so on in the hopes of getting it back in working shape. Quote Link to post Share on other sites
XyFreak 36 Posted May 12, 2017 Author Share Posted May 12, 2017 56 minutes ago, Nerdanel said: Oke so i'm completely new to open computers but I started using this program and it worked fine. however I now have a second setup on my world and for some reason the program doesn't set a target rpm speed any more in the program. I have no clue what i'm missing and I wiped the harddrive several times and so on in the hopes of getting it back in working shape. Sounds like it never gets out of calibration. Does it say anything in the reactor+turbine overview? Quote Link to post Share on other sites
Nerdanel 0 Posted May 12, 2017 Share Posted May 12, 2017 Yeah it kept giving an error. But I feel kinda stupid now for asking the question because I found the solution literally an hour after posting this ( and i was already looking for the solution for 3 days ) I messed up my second turbine. I was missing a ludicrite ring which caused it to spin to fast after activating the coil. Feel really stupid but consider the issue solved. ( the reactor now calibrates fine ) And thanks for the awesome program Quote Link to post Share on other sites
XyFreak 36 Posted May 12, 2017 Author Share Posted May 12, 2017 3 minutes ago, Nerdanel said: Yeah it kept giving an error. But I feel kinda stupid now for asking the question because I found the solution literally an hour after posting this ( and i was already looking for the solution for 3 days ) I messed up my second turbine. I was missing a ludicrite ring which caused it to spin to fast after activating the coil. Feel really stupid but consider the issue solved. ( the reactor now calibrates fine ) And thanks for the awesome program Good to hear Quote Link to post Share on other sites
XyFreak 36 Posted May 13, 2017 Author Share Posted May 13, 2017 Okay guys! I promised I'd work on getting the release done and I'm going to deliver. While I'm going to hunt down the last bugs, I'd like to gather some feedback on how the new GUI part for the grid controller looks. Please let me know if you feel like something is missing (e.g. showing the current charge in percent >_>). I'm also fine with "this looks awful" feedback ;). FYI: The "Charge" button, makes the controller charge your energy storage until it's almost full. This mode is automatically disabled after that. Quote Link to post Share on other sites
Derv 0 Posted May 13, 2017 Share Posted May 13, 2017 I need this lol ive been using your program for ages now and love it. This will just make it better hopefully it will be relaeased soon and ill throw it straight on. loving the new look Quote Link to post Share on other sites
Derv 0 Posted May 13, 2017 Share Posted May 13, 2017 i am struggling witht e reactor i think it needs recalibrating Quote Link to post Share on other sites
Trucido 0 Posted May 13, 2017 Share Posted May 13, 2017 I love your program. I just had two questions: 1. When will the new interface and release be available for testing? 2. Have you considered having a capacitor bank as part of the integration? Quote Link to post Share on other sites
XyFreak 36 Posted May 13, 2017 Author Share Posted May 13, 2017 1 minute ago, Trucido said: I love your program. I just had two questions: 1. When will the new interface and release be available for testing? 2. Have you considered having a capacitor bank as part of the integration? -> 1) Tomorrow or later today. -> 2) You are looking at the code that does just that Quote Link to post Share on other sites
