Jump to content
  • Sky
  • Blueberry
  • Slate
  • Blackcurrant
  • Watermelon
  • Strawberry
  • Orange
  • Banana
  • Apple
  • Emerald
  • Chocolate
  • Charcoal

corbanj6534

Members
 View Profile  See their activity

  • Content Count

    39

  • Joined

  • Last visited

 Content Type 

Everything posted by corbanj6534

  1. corbanj6534
    Ah okay, fair enough. No rush dude
  2. corbanj6534
    Ah okay that makes sense, so no easy workaround right now I assume?
  3. corbanj6534
    Ah okay, I'm not sure why it's mostly using 1 of the multiple reactors but i'll see what happens once it's fixed
  4. corbanj6534
    Okay so slightly weird issue. Running 1.7.10. I've got 3 reactors and a capacitor bank connected to the pc. My friend on the same server has 4 reactors and 2 capacitor banks. Every time we leave them running over night, we come back to empty capacitor banks, one empty reactor and 2/3 that are full of fuel and aren't doing anything. All the reactors are in grid mode and the program says it is increasing charge.
  5. corbanj6534
    Nice thanks. Also, when does the program auto start charging, I'm guessing below 50%?
  6. corbanj6534
    Quick question, can multiple capacitor banks be connected to the computer with different adaptors?
  7. corbanj6534
    This normally happens when the file thats trying to be run is empty, happened to me a couple of times earlier with a different program as the files weren't downloading from pastebin. Try redownloading the installer as @XyFreak said.
  8. corbanj6534
    Ahh was the memory. Needs more than tier 2. Thanks!
  9. corbanj6534
    Soooo Hi again, it's been a while xD. Having a bit of trouble with the latest version on 1.7.10. I have set up a reactor with a computer controlling it just fine, my friends are trying to do the same on the same server and it's failing to download br_grid_control @ 50% however it works fine in single player. Any idea what would cause this? Is it one controller per server?
  10. corbanj6534
    Simultaneous? I beat you by at least a few seconds xD
  11. corbanj6534
    You can do either of the following: cd /etc/ edit draconic_control.cfg OR edit /etc/draconic_control.cfg
  12. corbanj6534
    Okay so I'd like to start by saying i do have some advanced knowledge on computers and servers, so any advice is welcome. I Have 3 computers in the overworld. One is connected to a 3d printer and hologram projector and is almost always off. Another is controlling a draconic reactor and is on 24/7. The third hasn't been used for a while and is used to control 3 bigreactors and 24 turbines. When i try to create a new computer or restart one of the existing, nothing happens for a few seconds, then the power indicator will turn on, then nothing, no startup beep or anything, just f
  13. corbanj6534
    Not if both chunks are chunk loaded.
  14. corbanj6534
    A really long cable will work just fine, i thought you meant wireless.
  15. corbanj6534
    Not without changing the code, you're best bet is to have a manual override with a redstone control so you can turn it on if the shield gets too low.
  16. corbanj6534
    You could attach another flux gate to the line that goes into the injector and set it up yourself to insert as much power as you want (remember to have power going in)
  17. corbanj6534
    Is that on 1.10? i had something similar happen recently, but i think that was because of my power source for the shield failing. Just seemed a little too coincidental is all. edit: i'm still on 1.7
  18. corbanj6534
    I'm sure this could easily be done by just not telling the gui program to start the control one, check with @XyFreak to be sure tho. As for a remote screen, that's something i wanted to use and attempted to "hack" into the program, but it was too advanced for me to manage, so you may need to ask XyFreak really nicely xD
  19. corbanj6534
    Is the config file in the right place? If it's saying you haven't configured it, that could be why.
  20. corbanj6534
    In that case I'm too sure, sorry :/
  21. corbanj6534
    Make sure the networks aren't connected. And make sure you haven't broken any cable, otherwise i'm not sure.
  22. corbanj6534
    In that case I'm not too sure other than checking the address'. You could try and reinstall the program, make sure you wipe the drive first so that it's a fresh install, and also make sure the computer is powerful enough. And if that fails, it's up to @XyFreak i'm afraid.
  23. corbanj6534
    Drainback is what goes into the energy injector, Output is what comes from the stabilizer, if you have the output from the stabilizer going straight to the injector, try powering the injector in case it's not receiving enough power.
  24. corbanj6534
    It could be that the mod and the program are incompatible versions, if you're on 1.7.10 make sure you got the program from https://tenyx.de/draconic_control/1.7.10/dc_installer.lua as the 1.10 version is different. Also double and triple check the address' in the config just in case.
  25. corbanj6534
    Make sure the reactor is set up correctly and has plenty of fuel. Also make sure that enough power is available for the energy injector. Also if the reactors are near eachother, i believe you can use the same controller on both, you'll have to ask @XyFreak about that though since I haven't played with it yet. Edit: make sure you have the right version of the program and mod so it all works together. If that ends up being the problem you could always clone your working drive onto the new one and change the draconic_control.cfg afterwards. I found a good drive cloning program here:
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy.

  I accept