Magik6k 17 Posted April 30, 2017 Share Posted April 30, 2017 OETF #10 - OHCP - simple DHCP/BOOTP like protocol for host auto configuration. 1. Protocol This is specification for a binary data frame(a Lua string), sent over OETF #7 protocol with protocol number 0xCF. BYTE 0 | BYTE 1 | DATA | BROADCAST --------------------|--------------------------|----------------------------|----------- 0x00 - ADDR REQUEST | NOT SET | NOT SET | ALLOWED 0x01 - CLIENT RESP | 0x00 IPv4 address assign | IPv4+subnet byte (4b + 1b) | NO 0x01 - CLIENT RESP | 0x02 IPv4 gateway | Gateway IPv4 (4b) | NO 2. Protocol Flow When a new client is starting up, it SHOULD broadcast `ADDR REQUEST` once. In case of no response it may retry after at least 15 seconds. If server has free addresses in address pools it should respond with `CLIENT RESP` packets, setting the client up. Quote Link to post Share on other sites
