steel720

do the reactor and the computer need to be in the same chunk ?

yea i want to change the code bec its the beter way bec the reactor should compensait when the shield lvl goes low

yea but i was thinking more about doing it in the program

is there away to boost some more power in the injector so the reactor is safer ? even doe you burn alot of fuel to make rf i just want to know bec the higher preset dosent work in 1.10 bec the field lowers so hard so the reactor can control it bec i dont think the program is controling the input of power to the reactor

bec on the screen in the start i say that i have 180k rf/T input on the forcefield but i input 200k in the injector so i think its computer problem

yea i am on 1.10 and i have the same problem the forcefield shut down when i out but around 700k rf/t and i blows

yea its really wierd

yea but it blows before that

i cant run your beter preset bec the temperature load factor get really high and i have the chunk loaded so its no problem with that so idk what the problem can be any help ?

what is the problem ? cant start the program

and i now see why is warning its bec the temp is over 8000

atm bec i cant move the reactors and the computers to one chunk and cant get a chunkloader

yea bec atm i have the reactor in like 4 chunks or one of them is in 2

okay yea i dont get it why the would just blow up when i leave the chunk and come back is there anything i can do to fix it ?

and what have i done wrong when they randomly explode test server doe but the reactor was running fine and then it went to critical i am running the reactors = { { reactorAddress = "XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX", fluxGateDrainbackAddress = "YYYYYYYY-YYYY-YYYY-YYYY-YYYYYYYYYYYY", fluxGateOutputAddress = "ZZZZZZZZ-ZZZZ-ZZZZ-ZZZZ-ZZZZZZZZZZZZ", drainback = 1.1, targetSaturation = 0.10, throttleSaturation = 0.56, throttleTemperature = 8115, throttleExponent = 0.12, limitTemperature = 10000, limitExponent = 2.79, burnConversion = 0, burnRFt = 2000000 } }; preset

i was running your program that makes more rf for a while and its still say warning what can the problem be or should it do like that ? and i have problem when i leave the area around my base too do other stuff the chunk unloads and the open computer programs go buggy and almoste makes the reactor over heat

ah i can test it on one of the reactors the containment field is really low in % when you have the higer setings

yea atm they are slowly generating more rf/t

so it will go away later ? or will it allways flash like that or will that be a problem later ?

nvm i had the program in the wrong place so thx about that now why is it saying warning on the display when everything is running good ?

i tested it and it still wont start up the gui and on the other computer is say warning in blinking yellow all the time is that bad or ?

no i can try do it

any more screenshot you want ?

yea i have checked the address and they are fine but i have 2 computer for 2 reactors and one of them are working fine but the other computer wont accept my addresses or it say that i have not configured it but i have