SubThread 0 Posted September 16, 2017 Share Posted September 16, 2017 (edited) Drone Tree Farmer - Introduction - This is an automatic tree farmer script for drones harvesting spruce wood in king size (2x2). Just place a chest next to the drone and 8 or more saplings in the first slot and it should be be able to go on forever. No coal is needed, no charge pads, the solar panel upgrade will power the drone. This is not the fastest way to get wood, but it's pretty cheap, easy setup and doesn't need maintenance. Built for: OpenComputers-MC1.10.2-1.6.2.7, Lua 5.2. Also works on OpenComputers-MC1.7.10-1.6.2.12-universal, Lua 5.2, other than the beep sound is weird. Should work for newer versions too! - Requirements - * A working computer of any tier, to flash EEPROMs. * A drone (tier 1) with: cpu, ram, solar and inventory upgrade. * 8 or more Spruce saplings. Jungle trees are partly supported, it could work but branches will be left alone. * A chest or similar is recommended. * An empty EEPROM. - Usage - Part A - Flashing 1. Start up a computer with an internet card in it. 2. Replace the Lua EEPROM with an empty one. 3. Right click the computer screen and type (or paste): pastebin get kSjuz992 bios && flash bios 4. Follow the instructions and when done - take out your newly flashed EEPROM. Part B - Making the drone 1. Grab a Drone Case Tier 1 and place it in the Assembler. 2. Add T1 cpu, ram, solar upgrade and inventory upgrade. 3. Add the flashed EEPROM. (You can also change roms later if you want) 4. Assemble away! Part C - Actual work. 1. Find a flat area of dirt or grass. Remove any tall grass. 2. Place the drone so it got at least 10 blocks to the WEST of it. (Press F3 to find out where west is.) 3. Place a chest next to the drone, NORTHERN side (again F3 to find out). 4. Place 8 or more spruce saplings in the top left slot. 5. Start the drone. It should say ROM OK and get to work. 6. Grab a cup of Joe to celebrate. Source code:https://pastebin.com/kSjuz992 Disclaimer: This is my first lua script that I ever release so my code is far from good. Also, I am not a programmer, just started with this. This also got a lot of debug code in it, lack of loops, extra sleeps and what not. Thanks to irc chat for the sleep function! Edited September 22, 2017 by SubThread Improved the instructions. Quote Link to post Share on other sites
Myribox 0 Posted May 5, 2018 Share Posted May 5, 2018 Hello, I have instal the pastebin to the drone, but it seems that it doesn't break blocks. Its on cutting mode noting is breaking. Do I need to put a axe ore something? Quote Link to post Share on other sites
