NamesReed

On 4/24/2017 at 10:36 AM, XyFreak said:

@NamesReed

This sounds like your turbines energy storage is filling up so its slowed down to match your energy consumption. If this is not the case please check out what the steam input rate of your turbine is set to.

 

EDIT: Also make sure you're actually capable of transfering enough steam out of the reactor (I don't know how much dim. transcievers can move per tick in your pack)

After upgrading literally everything (bigger turbine, bigger reactor, dimensional transceivers for both water and steam on both) I was able to fix my problem.  i do believe the bottleneck was both the turbine and the pipes i was using (first was using enderio, then 3 transfer nodes with full upgrades).  Now im up to 10k rf/t and can make it go to 25k once i get some ludicrite.

Thanks for the help buddy.

Ill be off to bed.  If I don't reply, expect one in around 10 hours

The first with 3 control rods.  Ive tried manually setting a steam target. (After some fiddling with some pipes i was able to get it up to 900 with an rpm target of 873)  I get this massive error.  

One more quick question, Is there a way to set a custom RPM target for a turbine?  It calibrated my turbine at 761 RPM and the system is capable of 1800 easy.

EDIT:  It appears it has set a steam target of 900, however, the reactor is stuck at 200.  any ideas?  Using dimensional transceivers to move steam.  Reactor is 3x3x3 interior with 3 rods.

 Thanks.

Hey my dudes, Im getting stuck on install.  I downloaded it successfully (atleast it said i did)  and im getting 50% through the installer when it stops and gives me "Failed to download br_grid_control" 

Thanks

EDIT:  I may not have read deep enough, but two tier 1 ram sticks didnt work.  Swapped everything to teir 2 and it now works properly.